The first contact with Tekut's knives was attracted by a small Zero discount, and detailed evaluations were made after the Zero knives. After a few months in the blink of an eye, the other folding knife that Dick had seen in the middle was just a feeling that it wouldn't be attractive to see it. Tekut's knife-throwing shark tactics were forcing a lot. At first glance, I like this type of knife. After getting it, he and his brothers in the same co-edition first got together. The knife handles were similar on the lines, but the difference in size was more, and when they got the real thing, they were much larger than I thought. After opening the two styles are completely different. The packaging is still Dirk style transparent acrylic packaging, watching the grade is still quite high. G10 handle, handle corners have been chamfered. Closed length 121MM, this length is nearly 1cm longer than Eagle EL01. The overall tactical feel of the blade is very strong. The name of the knife and the shark is also very appropriate. After it is unfolded, the total length is 220mm. The use of water drop heads and false blades makes the overall streamline of the blade very good. The blade material used is Sandvik 12C27 stainless steel is now more than a major brand steel folding knife and a small direct use of a steel, I now have a few are 12C27 blade material, there is a good anti-rust and sharp degree. The folding knife is centered and the details are well finished. There is no nodding and plug after the knife is locked. The retractable back clip is the highlight of Dick's recent knives, and the feel of the launch and retraction is very good. The back clip is hidden in the pocket when it is open, and it is difficult to see it as a folding knife from the outside. Shark's blade edge design is similar to that of Dasha. This type of blade has good practicality and is very prominent in cutting. The factory edge is good, and no asymmetry is seen from the blade to the tip. The dorsal angulation of the back and the use of non-slip backs on the back of the knife not only increase the tactical wind, but it is also very good in practical use. The feel of the hand is much better than that of the flat knife. The factory locks in half, the locking piece is about 1.5MM, and the thickness of the locking piece is not thick but it is also quite sturdy. The locking plate unlocks the inner side with a semi-arc shape, which gives a good feel and practicality when unlocked. The blade surface has a grey sandblasted coating, which is also an aspect of increasing tactical feel. The coating surface is uniform. Below the Tekut logo, there are separate numbers for the knives. Dick's folding knife is very interesting point is that each model is basically its own unique icon, the shark's logo with the English alphabet and shark head and tail, it seems that this is a work. This folding knife uses fast ridges and opening and closing methods. The angle and feel of the quick spine are very good. There are chamfers in the conserving corners. I will attach the disassembled details photo in the picture below. Both the spindle screw and the shank screw are hexagon socket screw holes. The tool removal tool is better and the daily maintenance and dismantling is very simple. The design of the knife handle is very good, and the grip is comfortable. The handle handle's bulging makes the palm of the hand's grip strength very good. It fully exerts ergonomics. Whether horizontal grip or vertical handshake is great. Only the design of the knife handle is a bit too long. After folding, it is even longer than the knife edge. If it can be done more compactly, I think the effect of folding knife will be better. The quick success of spin-opening does not require a high rate of success in throwing a hand to shake the wrist, and the quickness of the operation is neat, which is mainly due to the merits of the internal bearing gasket. Dynamic cutting diagram Folding state to get started, my hands are small. The blade length measured 9.6CM, which is a bit longer than the 9-fold blade of many domestic brands. Ball bearing gaskets do not cut corners and internal materials are solid. Take a few more blades and bearings close-up. Remove the blade to see the details of the blade and the details of the process is in place. This is a good workmanship in domestic discount knives. There are 4 weight reduction holes on the side of the shank liner. The center of gravity of the blade is basically controlled at the position of the knife handle. The edge sharpness of the factory blade is not too sharp, but the paper cutting is still no problem. It is a large use method of the household at ordinary times that it is a large folding of the cut fruit. The shark's knife type is still quite good in terms of the practicability and feel of cutting fruit, and it is much better than the edge-type practical handfeeling of the previous generation Zero in my hands. In the test of the degree of holding of the blade, I did not affect the paper cutting test after cutting the wooden stick more than twenty times. Then it was used to cut the bamboo and did not cut the test after 30 times. It was still able to cut the paper, but there was only a little flash. By using the test of cutting sticks, the damage to the blade's holding power in the case of daily use is very small if not several hundred. Using a broken hemp rope to cut the paper after cutting 10 times in the same part of the blade is not enough, just like a hand-tear. It should be the reason why too much dust is in the root string I use. After this part of the test, sandpaper is used to make a test in a state where the blade can be polished by several dozens of times and then returned to normal state. After the same part cuts the copper core thread fifteen times, the blade has a slight white line and cannot cut the paper. 12C27 seems to do this kind of rough or almost. However, the use of knives will not be too violent in everyday use. Because this kind of steel is not just God's usual use or enough, it will not be a kind of violent test such as cutting iron. When using a wood material, it's fine. Hacking the test video: https://?utm_s... (You can click on the link to watch the test video, because now Youku and other video sites have a very strict review. After the video is uploaded, the audit fails to pass through to the niche video site.) The lock test of the wire lock repeatedly hits the back of the blade with no more than several dozen unlocked cases. This folding knife still performs well in locking safety. http://video.tudou.com/v/XMzE2ODk1MTgyOA==.html?sp...(This is a test video, because Youku and other video sites are now very rigorously audited. After uploading the video, the audit will not pass and only pass to the niche. Video sites, forums cannot be directly referenced) Contrast with Eagle Lang EL01 and EL02. The blade length and shape are similar to those of the Nine District Junior Defense Defender 2 which is also a tactical style. Height Adjustable Drafting Table A height adjustable drafting table is a specialized table used by architects, engineers, artists, and designers for drawing, sketching, and drafting. It typically has a large, flat surface that can be tilted to different angles to provide a comfortable working position. The surface is often made of wood or metal and may have a ruler or straightedge attached to it for precise measurements. Drafting tables may also have drawers or compartments for storing drafting tools and supplies. They are designed to provide a stable and adjustable surface for creating detailed drawings and plans. Electric Drafting Table,Adjustable Drafting Desk,Adjustable Height Drawing Table,Sit Stand Srafting Desk,Standing Drafting Desk Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplifting-desk.com
Comparison of knife size 
The personal feeling is not very good place is the knife handle design is too long, in the closed state, the handle should grow a lot of cutting edge, if the handle can be made in a compact some will be better.