SUNUP CRV Gravure Printing Water Based Ink

CRV series of water-based gravure ink selection of advanced imported pigments, high-grade water-based acrylic resin and a variety of additives, with good printability.

First, product characteristics 1, water-based gravure printing ink is a green printing material, is a non-toxic, non-irritating, odorless, non-corrosive, non-flammable, non-explosive, the use of good safety performance products. It is especially suitable for products with strict hygiene requirements such as tobacco, alcohol, food, and medicine. 2, good printability, suitable for a variety of gravure printing models and printing substrates, bright color, dot reduction, good color development, good adhesion and wear resistance, suitable for high-end environmental protection products printing. 3, water drying performance, machine speed up to 150 meters / minute. 4. Easy to operate, no need to use organic solvents, direct dilution with water saves printing costs, and solves the physical damage caused by organic solvents to operators.

Second, for the substrate: coated paper. White cardboard. Gold and silver cardboard, kraft paper, glass cardboard and aluminum spray paper

Third, the product categories: 1, conventional products: CRV-1000 white CRV-2001 red CRV-2002 Baohong CRV-2003 brilliant red CRV-4000 yellow CRV-5000 green CRV-7000 blue CRV-8000 purple CRV-9000 black, Waterborne varnish, in addition, the company can provide spot color inks according to the needs of users. 2. Adjuvants: Dilutants, thinners, quick-drying agents, slow-drying agents, defoamers, tackifiers, pH modifiers, cleaning agents 3, special custom inks: waterborne wear-resistant according to customer's special needs Type, non-slip type, stacked color and other products.

Fourth, the use of methods: 1, must be fully stirred before use. 2. Dilution solvent: Absolute ethanol/water = 1:1 or dilute directly with water. 3. Please adjust ink viscosity according to different models, printing speed, printing plate and substrate properties. 4. If there is any problem with drying in printing, please contact our company or use the quick-drying agent or slow-drying agent provided by our company. 5. If excessive foam is produced during printing, defoamer 2‰-3‰ can be added as appropriate. 6. Do not mix with other companies' products to avoid flocculation and affect production. 7. When the printing equipment is finished, please wash it with water or alkaline detergent in time.

V. Notes: 1. If there is any remaining ink, please seal it in a cool place and save it as soon as possible. 2. If there is any foreign matter in the ink, it should be filtered with a filter of 80 mesh or more before being mixed with the new ink. 3, the best storage temperature can be maintained at 15-25 °C. Humidity is about 65%. 4. Do not allow the ink to come in direct contact with your eyes. If you accidentally spill your eyes, rinse it with clean water immediately. Special note: The data provided in this description is measured under laboratory conditions and is for reference only. When users use, please be sure to determine the printability under the relevant conditions