The solid wood wardrobe is made of wood on the raw materials. In modern society, with the improvement of the quality of life, people gradually began to pursue the 'green environmental protection' home environment, the same for furniture, and its 'health and environmental protection' performance has gradually become the focus of people's attention. Today, paying attention to environmental protection and quality, the solid wood wardrobe is popular. However, solid wood furniture has a lot of different kinds of wood. If you understand the solid wood materials, you can choose the right wardrobe for you. 1. Is the solid wood wardrobe structure firm? Small wardrobes can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating that the quality is better; if the sound is dumb, there is a murmur in the slap, which means that the blinking is not tightly combined and the structure is not strong. 2, veneer wardrobe seams are not strict Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. It is necessary to check the seams clearly under sufficient light. The ash veneer veneer veneer is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. The particleboard veneer closet, the ground part must be edged, and the unsealed board will absorb moisture, swell and damage. Generally, the corners of the veneer close to the corners are easy to tilt up. When picking, you can use your hand to rub the corners. If you get up, it will be a problem with the glue. 3, whether the solid wood wardrobe edge is flat The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The wardrobe with the plywood package is nailed with nails. Pay attention to whether the nail holes are flat and the color of the nail holes is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it will not work. Slowly, the putty will fall out from the inside. 4, the mirror wardrobe should take a photo Choose a wardrobe with mirrors, such as a dressing table, a mirror, and a mirror. Take care of it and see if the mirror is deformed. Check if there is a liner and backboard in the mercury at the back of the mirror. Qualified, no paper, no, otherwise the mercury will be worn away. 5, the paint part should be smooth The paint part of the solid wood wardrobe should be smooth and flat, not wrinkled, flawless, etc. The corners are not straight at right angles, and the straight edges are prone to slag and paint. The inside of the door of the closet should also be painted with a lacquer. The non-painted board is easy to bend and not beautiful. Special note: Be sure to check that the door lock switch is not working; the big cabinet should be equipped with 3 hidden hinges, and some can only be installed with 2; the upper 3 silks, some cut corners, only one screw, use Will fall. Thin Slippers,Winter Slippers,Winter Wear Slippers,Warm Slippers For Winter Ningbo Autrends International Trade Co., Ltd. , https://www.homefavorities.com