Solid wood furniture is generally a high price, in many consumers' minds, it is a symbol of grade and identity, but now many consumers can't tell the difference between solid wood furniture and general panel furniture, and it is not clear how to buy real Good quality solid wood furniture. In fact, experts told reporters that as long as the solid wood furniture can pass the following "ten customs", it is good furniture. Judging furniture Is it really made of solid wood? A mystery to judge whether solid wood furniture is: wood grain and thrift. Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood cabinet door. In addition, watching thrift is also a good way to identify solid wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. Judging furniture What kind of tree is made? This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap. Observe the good and bad wood Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell. Observe the wood with or without defects The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails. Observe the strength of the board The surface of the board can be pressed with a finger to feel the fastness of the board. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board. Cabinet doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint. Check stability and safety Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict. Wooden furniture should have safety and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging; the mirror and the dressing The back plate should be installed on the table, and the bead should be fixed on the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You should push the top corner of the furniture or sit on one side and try to make sure the furniture is firm. Check interface Furniture with dovetail or butterfly joints should be purchased. Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached. Check the drawer Slide and latch The drawer should be strong and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected. Check surface Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles. Furniture should "stand upside down" Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip fastened to the crosspiece? There are no excess glue and filler in the seams.
Girth Cover includes geniune sheepskin, polar fleece, cotton material as you demand. Girth is packed by girth cover outside. You can choose the style according to your local temperature and customer's requirements. The length and width can be customized basing on your horse's bodily form. We usually make the length of 60cm, 70cm, 75cm, 80cm, 90cm, 110cm. You can choose the length above. We can also make customized length for you. Dying customized girth cover color for you is also no problem. Waiting for you to contact me.
Girth Cover Girth Cover,Dressage Girth Cover,Horse Girth Cover,Fancy Girth Cover Hebei Honde Group , https://www.horseequipmentfromchina.com
