The high and low temperature test chamber is used for the simulation of the temperature change law in the atmospheric environment, and can be applied to the high temperature/low temperature reliability test of industrial products. As a temperature and humidity test equipment, its temperature and humidity are naturally two important factors affecting the performance of components. Temperature and humidity can cause corrosion to mechanical parts, resulting in operational errors or test interruptions, which have a great impact on the equipment. Therefore, operators should regularly repair and maintain the life of the equipment. In the future use of high and low temperature test chambers, some troubles may occur to the equipment due to long-term operation. In the maintenance of the equipment, the radiator should be re-fastened and heated to clean the sealed optical frame window. When necessary, it is necessary to calibrate, clean and lubricate mechanical parts, and then check, adjust and record after returning to the original state. High and low temperature test chambers in high and low temperature working environments, dust and corrosive gases can also affect the flexibility of the mechanical system, and its reduction of limit opening, reliability of optical coupling and buttons are corroded by aluminum products. One of the reasons for the research. It is important to note that when the temperature of the device is higher, the lower the temperature will be, so it is recommended not to add water to avoid unintentional damage to the machine. Furniture And Cabinet Fittings Cabinet Lift Support,Sliding Door Pulley,Cabinet Door Lift Support,Furniture And Cabinet Fittings Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com