Pc Distribution Frequently Asked Questions and Precautions (3)

Other considerations

1. The corner line should be four-color black or color for imposition. The width is generally a very thin line (0.076). When it is used, it must not be lower than 0.04mm, higher than 0.01mm, the screen film is generally 0.3mm-0.5mm, Note that the color must be framed.

2. Note that if the bar code generated in coredraw is not converted into a bitmap, check whether the garbled characters will be changed due to bad font, or the bar code may be changed due to forced rotation, such as the situation where the number is contracted to a piece.

3. For documents such as some who need to change the number of lines and change the angle at the time of publication, you must first change the line number and then change the angle before publishing. Otherwise, changing the angle and then changing the number of lines is still the default value.
4. If the line is linked to the net, then the thickness of the line should not be less than 0.2 mm. Otherwise, the lines will have uneven thickness and even appear blank.

5. After printing, if the file cannot be interpreted by RIP, it is generally scattered or scattered. At this time, the picture can be transferred.

6. PS is explained by RIP only a small part, the reason is that the effect is too much, this is the software's BUG problem, the effect is too much better to turn the map.

Pagemaker

Precautions

1. It is not allowed to use the Founder font in the document, especially the relatively large font, and the use of the Founder font may only be issued half.

2. If the file is larger than the three open specifications, the TIF image cannot be used. Otherwise, the picture may be stretched and deformed. EPS images must be used. The RGB image in the eps format is grayscale.

3. Use EPS format pictures, please use photoshop photos, pay attention to the storage options when storing, should be TIF-8 bit and binary respectively, if you use the binary JPG best quality, will cause RIP can not read or picture becomes Problems such as grayscale mode, encounter such problems, re-storage pictures can be solved.

4. If there is a problem with the image, you will need to re-key. There is a question mark before the link with the problem, but if there is a question mark in the text document link, it can be ignored.

5. Notice if the text content has been exhausted. Whether to skip or cover other content.

6. It is not valid to fill the color of Pagemaker in Photoshop.

7. The images used in Pagemaker must first be checked in Photoshop because some images will be broken.

print

1. If the black text or line breaks through the background color, this can be solved by trapping the option. The line type fills in the options to make traps.

2. Content outside the page Pagemake can't be sent regardless of the size of the page, so you need to pay attention to whether the contents of the offset line are placed outside the page before printing. If so, you must place it on the page by changing the page size. The

Can print.
3. In the printed document options, the proofreading option cannot be selected. If the selected PS file can be read, other options need to pay attention that the collage must be none and the size must be 100%. The picture is normal, the text guides the bitmap image, especially for the font, it must be a bitmap, otherwise the PS file is generated, and the font may become garbled.

4. If there are colors independent of four colors in the printing separation options, you need to remove the unused colors. If you don't, you can select all of them to be spot color options, otherwise for some of the self-defense defined primary colors Can't send it out.

Source: China Design Printing Network