PVC Sports Floor Acceptance Standards and Waxing Guide The acceptance standards for PVC sports flooring are crucial to ensure the quality, durability, and safety of the installation. These specifications cover both the master control project and general project aspects. **Master Control Project:** 1. The types, dimensions, colors, and grades of PVC tiles and rolls used in the surface layer must comply with design requirements and current national standards. *Inspection Method:* Visual inspection combined with verification of material certificates and test reports. 2. The surface layer must be firmly bonded to the underlayer without any lifting, delamination, or plastic seepage. *Inspection Methods:* Visual check, tapping with a hammer, and measuring with a steel ruler. *Note:* Local delamination areas should not exceed 20 cm², and the spacing between such areas must be at least 50 cm. For single tile corners or standard rooms, minor delamination (up to 5% of the total area) can be disregarded. **General Project:** - The PVC floor surface should remain clean, with clear patterns, consistent color, tight joints, and no glue marks. The edges where the floor meets walls should be tightly sealed and square. *Inspection Method:* Visual inspection. - Welded seams between tiles must be smooth and even, free from defects like discoloration, spots, or flaking. The allowable deviation for irregularities is ±0.6 mm, and the tensile strength at the weld should not be less than 75% of the tile’s original strength. *Inspection Method:* Visual inspection and review of test reports. - Trimmed edges should be precise, with neat corners, straight seams, and tight connections. *Inspection Method:* Use of a steel ruler and visual inspection. **PVC Sports Floor Waxing Process:** **Professional Waxing Steps:** 1. Begin by cleaning the PVC sports floor from the inside out. 2. Apply a diluted multi-purpose cleaner into the cleaning machine for thorough cleaning. 3. Clean from light to heavy stains, ensuring full coverage. 4. Use a suction machine to remove all wastewater after washing. 5. Wash the floor again with a multi-purpose washer, moving backward to overlap each pass. 6. While cleaning, use the suction machine to remove excess water. 7. Allow the floor to dry for 10–20 minutes. The number of wax layers depends on the floor condition. 8. Apply liquid wax evenly using a wax applicator. 9. Drag the wax mop across the floor, let it dry, and then wipe off the final layer. 10. Apply anti-static wax to enhance shine and create a protective layer, offering dust and static resistance. Avoid walking on the floor for at least 30 minutes after waxing. **Home PVC Floor Waxing Steps:** 1. **Cleaning:** Mix de-waxing solution with water and spray it onto the floor using a machine brush for effective cleaning. 2. **Water Removal:** Use a water suction device to remove all standing water. 3. **Waxing:** Apply wax evenly using a wax mop to maintain the floor's appearance and extend its lifespan. **Important Notes on Waxing:** 1. Use appropriate cleaning fluids as per instructions. In cases of heavy pollution, use minimal water. You may also mix cleaning solution with wax for better stain removal. 2. After washing, push excess water away from the cleaned area and remove it with a suction device. 3. Ensure the floor is completely dry before applying wax. 4. Apply wax uniformly, avoiding excessive thickness or thinness. Use a wax mop to spread it evenly for a shiny, long-lasting finish. 5. Regular waxing is recommended—once a year for normal use, and every 3–6 months in high-traffic areas to maintain cleanliness and shine. **Related Reading:** - PVC Floor Daily Maintenance Manual - Four Key Comparisons Between PVC Sports Flooring and Solid Wood Sports Flooring By following these standards and maintenance procedures, you can ensure your PVC sports flooring remains in excellent condition, providing a safe and attractive surface for years to come.

Rattan Flower Pot

Rattan Flower pot is suit for outdoor garden usage for long time. The material is UV resistant PE rattan and 1.2mm thickness aluminum frame with powder-coated.

Outstanding weaving and structural integrity make our rattan flower pot a welcome addition outdoors. Rattan fibers are smoothly double woven around concealed powder-coated aluminum frames. Gently angled backs and wide arms encourage restful lounging.

· Traditional forms with a spacious, inviting scale

· Handwoven premium resin wicker UV resistant

· Rust-resistant powder-coated frames

· Different size and design for your selection

· Accept OEM, ODE design, factory price

We have different design rattan flower pot, different size for your selection, you can decorate your home or garden, make your life clean and neat.

If you have any questions, please contact with us directly. Rattan Flower Pot are produced by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.

Rattan Flower Pot,Outdoor Rattan Flower Pot,Garden Rattan Flower Pot,Patio Rattan Flower Pot,Poly Rattan Furniture

Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoor.com