Carefully choose the elderly room furniture In terms of furniture selection, the elderly should pay attention to environmental protection, safety and lightness, and must conform to the physical characteristics of the elderly. In addition to the safety of the home environment, the most important thing is to facilitate the use of the elderly. Reasonable function is to choose the key point Old people like to do their own cleaning. Generally speaking, furniture can't be done too high. Otherwise, the old man should climb up to clean and easily accident. The furniture is best closed, avoiding falling ash and convenient cleaning. At the same time, it is not advisable to have over-the-top cabinets to reduce the climb of the elderly and reduce the presence of unsafe factors. Especially in the arrangement of the drawers, the drawers are relatively increased. Old people can put their own items inside, easy to find. The lowermost layer of furniture, it is best not to design partitions or cabinet doors, because the old people's legs and feet are not good, it is more difficult to squat, and the depth of the partitions and cabinet doors is too long, it is not convenient to take things. If it is designed as a drawer, it is best to move the drawer handle up to facilitate the elderly to pull. Furniture safety performance must be considered In addition to the decline in physical fitness, the coordination ability of the elderly's body will also decline, so when choosing furniture for the elderly, try to avoid the abstract geometric shapes that young people like. Furniture should choose some sharp and sleek shapes to reduce the occurrence of accidents such as bumps and abrasions, and psychologically give the elderly a sense of security. Use a number of round and elliptical shapes to minimize the shape of the shape with sharp corners such as diamonds and triangles. Try to use some symmetrical and balanced shapes to ensure the stability of the furniture, so as to visually give the elderly a sense of security. According to reports, it is best not to choose the movable furniture with pulleys for the elderly, such as small coffee tables and small cabinets that can be slid, to prevent the elderly from moving and causing them to fall. Bedding customization varies from person to person Due to the different physical conditions of the elderly, the size and comfort requirements of the furniture are also different. If possible, the choice should be based on the physical condition or posture of the elderly. Older people with poor lumbar vertebrae will require the bed to have a certain height and the bed should not be too soft. The width of the seat of the sofa and the seat should be large, and the large size makes it easier for them to sit up, and the movement is more free and more comfortable. The seat should have armrests as much as possible, which can be used for the elderly to grasp when they sit up and increase the balance of the body balance.
The polypropylene composite cap for plastic infusion container comprises of the pullâ€tab outer cap, inner cap, and synthetic medicalâ€level polyisoprene cushion; among which, the materials for the inner cap and outer cap are the imported medicalâ€level polypropylene, complying with the FDA rules and passing the USP CLASS VI test; the synthetic medicalâ€level polyisoprene cushion can be made from the imported product on the request of user. The inner cap of the composite cap will contact with liquid medicine directly to ensure the quality; whereas the cushion will be helpful to prevent penetration and seal whilst infusing the liquid medicine, and the outer cap plays a role to prevent bacterium.
The composite cap is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, assembly and inner packing and so on, are designed and processed as per the
cleanliness requirements at the partial level of Class 100, which passes the GMP onâ€site certification and complies with the cleanliness
requirements of high capacity injection medicine.
The facilities involved by production, test and inspection of composite cap are available, with strict control and management to be conducted in the whole process of production, free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such facilities may ensure the product quality.
The polypropylene composite cap for plastic infusion container is mainly used for nonâ€PVC softâ€bag infusion and polypropylene plastic bottle infusion.
PP Composite Cap For Plastic Infusion Container Pp Cap,Plastic Cap For Infusion Container,Pp Cap For Plastic Infusion Container,Caps For Infusion Containers YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com