Why do custom wardrobe manufacturers use more solid wood particle board?

Everyone has heard of a saying that custom-made wardrobes are made of solid wood particle board, but many people don't understand why they should use solid wood particle board. Let's take a look at it today. What are the benefits of custom-made solid wood particle board for wardrobes?

What is solid wood particle board

Solid wood particle board is a kind of particle board. It is made of wood or other lignocellulosic material. The fine wood fiber is used on both sides, and the long wood fiber is sandwiched in the middle. The adhesive is applied under the action of heat and pressure. The board is a board produced by the process of particle board.

Solid wood particle board can be favored by many custom manufacturers, mainly depending on the solid wood particle board is the best choice of the combination of cost, process, performance, easy processing, plasticity and so on.

In fact, the goodness and the badness of a piece of furniture, in addition to the visual sense of the appearance, depends on the basic properties of the board used. It mainly includes the static bending strength, water swelling ratio, nail holding power and formaldehyde emission. Among these options, although the solid wood particle board is not stronger than the other artificial boards, its balance performance is the best. In particular, its nail holding power is the strongest of all artificial panels, and the nail holding power is good or bad, which means that during the process of using the furniture, will the cabinet door suddenly fall down, and the drawer will suddenly disappear one day. Can't pull open, the cabinet frame will not be deformed and so on. In short, after weighing the basic performance of all the plates, most manufacturers finally chose solid wood particle board.

The most important point is still dependent on cost and profit. Compared with other artificial boards, solid wood particle board has the longest history, the most mature technology, the largest market share, and the price is also the most acceptable one for ordinary people. Like this kind of raw material that is both cheap and convenient, and the public is more acceptable, why should the processor not choose it?

Based on the above conditions, the solid wood particle board raw materials are cheap, easy to manufacture, no need to paint, simple and fast, and finally become the preferred choice for most custom manufacturers. It is not difficult to understand, it is logical.

For more information, please pay attention to the official website of Xianghe Furniture City http://

Pet House

outdoor pet house,indoor pet house,small pet house,pet bed house,Comfortable pet house

Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsproducts.com