One of the most important components of the fast temperature change test chamber compressor is the gas valve, which is also the most sensitive and vulnerable part. Its performance directly affects the economy and reliability of the compressor system operation, which also leads to The main reason for the quick temperature change test chamber compressor to stop without any reason. Therefore, we should give due attention and understanding to avoid the occurrence of faults in the quick temperature change test chamber valve. The gas valve of the compressor is divided into two types: an inhalation valve and an exhaust valve, and another concentric valve (integrating the functions of the inhalation valve and the exhaust valve). The structure of the compressor valve of the fast temperature change test chamber 1, valve seat The valve seat has a gas passage covered by the valve plate and is subjected to a gas pressure difference inside and outside the working chamber. 2, opening and closing components (valve) The opening and closing of the valve seat channel of the camp, controlling the gas into and out of the working chamber, usually made into a sheet, is often referred to as a valve plate. 3, lift limiter (bonnet) The bonnet is used to limit the rise height (lift) of the valve plate and is often used as a seat for the spring. 4, spring The spring is the part that pushes the valve piece to the valve seat when the valve is closed, and suppresses the impact of the valve piece on the lift limiter when the valve plate is opened. Understand the most basic knowledge, when using the fast temperature change test chamber, you can do some related inspection and maintenance, thus reducing the failure rate. Crochet Bags,Crochet Market Bag,Crochet Bag Pattern,Handmade Crochet Bags Shandong Guyi Crafts Co.,Ltd , https://www.guyicraft.com