At present, the ceiling lamp is a ceiling lamp. The gorgeous ceiling lamp is a lamp that is adsorbed or embedded in the ceiling of the roof. Like the chandelier, it is also the main lighting device in the room. It is a lamp that is often used in various places such as homes, offices, and entertainment places. Today, Xiaobian will take everyone to understand the installation steps of the ceiling lamp and some tips for cleaning. Let's take a look at it with Xiaobian! First, the ceiling lamp installation steps 1, choose a location The first thing to do to install a ceiling light is to determine where the ceiling light is installed. For example, the ceiling lamps in the living room, dining room, and kitchen are installed in the middle, so that the light at each position is relatively average. In the bedroom, considering the effect of mosquito nets and light on sleep, the ceiling light should not be installed above the bed. In addition, the ceiling lamp needs to select a wall or ceiling that can withstand the weight of the ceiling lamp, such as a masonry structure, and try not to select a wooden wall surface, so as to avoid the risk of falling for a long time. Ceiling light installation steps 2, remove the ceiling lamp mask Remove the ceiling lamp mask. Under normal circumstances, the ceiling lamp mask has two fixed ways of rotating and snapping. When disassembling, pay attention to avoid damage to the ceiling lamp. After removing the mask, the lamp is also removed to prevent the lamp from being broken during installation. 3, the installation base Place the base in the predetermined installation position, mark the wall with a pencil, then take the base, drill with the electric drill at the marked position, and then install the expansion bolt for fixing the base in the hole, paying attention to the diameter of the hole and the depth of the bolt and the bolt The specifications match. Then put the base back to the predetermined position and fix it. 4, connecting wires After fixing the base, you can connect the power cable to the terminal block of the ceiling lamp. It should be noted that the two wires connected to the power cable of the ceiling lamp should have good electrical contact, and should be wrapped with black tape separately. Keep a certain distance, if possible, do not put the two wire heads under the same piece of metal to avoid short circuit, which is dangerous. 5, the installation of masks, ornaments After connecting the wires, you can try to power on. If everything is normal, you can turn off the power supply and install the mask of the ceiling lamp. The living room ceiling lamp also needs to be equipped with a series of charms, because each ceiling lamp pendant is different, so the specific installation method can refer to the product manual. The charms will generally remain, can be stored after installation, and can be replaced when needed later. Ceiling light Second, the ceiling lamp cleaning method 1. Cleaning of the ceiling lamp cover The cleaning of the ceiling lampshade depends on the material of the ceiling lampshade. There are also different cleaning methods: cloth lampshade, first use a small vacuum cleaner to suck off the surface dust, then pour some detergent to scrub; if the inside of the lampshade is paper material, Avoid using the detergent directly to prevent damage. Wipe it with a dry cloth. The frosted glass lampshade is cleaned with a soft cloth and toothpaste. The dirt on the bumps can be wrapped with a soft cloth. 2, the dirt on the lamp holder is clean The dirt on the lamp holder is clean. You can remove the dust on the surface first, then wipe it with a cotton cloth and do not let the water remain on the lamp holder. When scrubbing the ceiling lamp, you should use a light cotton socks or cotton gloves on your hand, gently wipe the lamp, and do not move the parts inside the lamp. After cleaning, the lamps should be installed as they are, and do not miss or misplace parts. Ceiling lamp cleaning method Xiaobian reminder: Since the ceiling lamp is hung in a high place, the lamp cover and the light bulb are easily broken. Therefore, when disassembling the lamp cover, try to cooperate with two people; before disassembling, turn off the power supply, and do not scrub the lamp holder with a wet cloth to prevent leakage. The above is the installation steps and cleaning tips for the ceiling lamp shared by you. I hope to help you. If you want to know more about the ceiling light, please continue to pay attention to the net. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action! Barbed Wire,Barbed Wire Fence,Razor Wire Fence,High Tensile Barbed Wire Anping County Hua Guang Wire Mesh Production Co.,Ltd , https://www.hgwirefence.com
