The energy-saving lamp is actually a compact fluorescent lamp with its own ballast. Energy-saving lamps play an important role in our side. In modern society, resources are becoming increasingly tense, and energy conservation and emission reduction have become our slogan. Especially for electric energy, the loss of electric energy in modern society is very large. The selection of energy-saving lamps for house decoration can reduce the pressure of electric energy. How to choose energy-saving lamps ? This article teaches you how to choose energy-saving lamps. First, how to choose energy-saving lamps - appearance inspection The plastic shell of the lamp is necessary to choose the kind of engineering plastic flame retardant. Usually plastics are easily deformed and flammable, and are used to prevent the production of energy-saving lamps. From the appearance, the two can be roughly distinguished. The latter is more lubricious and shiny, and the former has a similar texture of frosted glass. In addition, from the perspective of the lamp, many lamps can be placed in a year-on-year photo. The shape of the lamp and the similarity of the specification are better. The machine is bent and formed. The homogeneity of the product is good, the quality is relatively simple, and the repair is made. The interchangeability is better. Of course, there should be no cracks, looseness, and traces between the interfaces. Second, how to choose energy-saving lamps - see compatibility In China, electromagnetic compatibility is a necessary project for electrical appliances. However, the viewing of this project is very messy. When users buy lamps, they have to see whether the packaging has passed the national electromagnetic compatibility test. Second, they have a medium-short wave radio. When the lamp is working, put the radio in the vicinity, the lower the noise announced by the short-wave radio station, the better the electromagnetic compatibility of the lamp under test. Third, how to choose energy-saving lamps - see the function If the store has a better voltage regulator, in the power-off condition, first turn the regulator at 150W (according to the relatively low starting voltage policy listed in the clarification book), install a cold lamp, and leave the lamp. It is better to turn on the power at a time. It is reasonable to say that the cumbersomeness here is because the launching of the energy-saving lamp has two characteristics. One is that the higher the temperature, the simpler the launching, and the other is that the light is also slightly activated when the human body touches. Also remind the so-called "one-time" question, many lights are on and off, which is not good, the more sophisticated lights are usually equipped with a filament preheating circuit when starting, 0.4 seconds when starting Dominant delay, so "once" should be known to shine less when starting, the root of the tube should not show red light. The above is how to choose energy-saving lamps for you to share with you, I hope to help you. If you want to know more about energy-saving lamps, please continue to pay attention to the network. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action! Linte remover,Best Seller Lint Removers,Best Seller Lint Removers,Clothing Lint Removers Zhejiang Hisun Electrical Appliance Co.,Ltd , https://www.cn-hisun.com
