Roller blinds installation precautions

Roller blinds installation steps

The first step: installing roller blind accessories

Determine the installation position and mode of the curtain, the direction of the head and the bead, depending on the situation at home, whether it is side or top.

The second step: head mounting

There are two ways to install the head according to the situation. One is the exterior, and the roller blind curtain head is installed on the window frame or the wall surface, and the rotatable part of the head without the beading section is opened. The second type is the interior. The roller blinds are installed in the window frame. The heads will be installed at the corresponding positions, and the rotatable part of the head without the beading section will be opened. The two methods are only different in the position of the head, and the other installation methods are the same.

Step 3: Install the track

1. Place the right end of the upper rail of the roller blind curtain into the head with a length of the bead, and then place the left end into the head without the bead.

2. Check the roller blind on the mouth of the rotatable module opened in the second step.

3. Pull the roller blind through the pull bead to see if it can be lifted normally. If there is any abnormal sound, confirm that there is no problem and install it.

Editor in charge: Chen Jiacun