Home lecture hall: How to identify fake and shoddy furniture

In order to allow consumers to better identify genuine and fake furniture and avoid being deceived, here are some ways to identify the quality of furniture and check fake and shoddy furniture:

1. Pay attention to whether there is any groove on the structure of the furniture frame, and whether it is glued tightly.

Pay special attention to the phenomenon of breaking or breaking. For the hidden drawer inside, it is necessary to check whether there is a groove in the drawer structure, whether the glue is glued in the groove, whether the drawer and the plug are connected by nails. Before buying a sofa, you should observe it from the bottom of the sofa. If the frame only uses nail structure, it will not open your eyes or apply glue. If you take a long time, it will loosen and deform.

2, the level of workmanship is the key factor to distinguish the advantages and disadvantages of furniture.

For example, if you buy a sofa or a mattress, first observe whether the appearance quality is pleasant; secondly, check the degree of straightness of the outer floss of the outer cloth, whether there is a jumper phenomenon; once again, take a look at the cover used inside, whether it is used or not. Cloth and dirty leather.

3, wary of the sky.

The leather surface of the leather sofa has no suitable hand feeling, or it is thin, soft and cool, or it is thick and dry, and the gloss is not high; the leather sofa is delicate and flexible, and the hand-featured performance is good, and the skin texture has a tendency to go and the gloss is high. When you buy solid wood furniture, you can't just look at the surface wood grain. You should be careful to cover the furniture in the middle. As long as you observe it carefully, you can find the clues of the veneer by comparing the shading and the back of the matching corner or back. . Some of the thick and heavy furniture, the surface of the furniture can not see the wood, the inside is all inferior sheet, all rely on paint, greasy packaging. If you buy it home, once the paint is dropped, it will be difficult to use it. All-inclusive sofas also have problems that are unpredictable, so inspections are important, and special attention should be paid to whether the interior wood is rough, decaying or eroding.

4, identify the cut corners.

For example, some furniture uses medium-density slats and chipboard slats as load-bearing components. There are also some furniture, the back of the dressing mirror is not fixed by the baffle and the beading, only the nail is used as the supporting pin, which is not strong.

5. Check the dryness of the wood inside the furniture by hand.

In this way, the moisture content of the wood is determined. It should be noted that the wood is not dried, the water content is high, and the furniture is easily deformed and sampled.

In addition to mastering the above knowledge of identifying furniture inferiority, it is also necessary to find those stores that have after-sales service vouchers (writing responsibility and compensation methods) to purchase furniture, so as to avoid problems in the future.

SDU Brand

S.D.U. CAREPLEX

SPECIAL DUTY UNIT FOR STYLIST