ã€Abstract】The factors affecting the formaldehyde emission of furniture are complicated. Aside from the overall product, there are many factors affecting the release of formaldehyde from wood-based panels. The types of wood, rubber, rubber, hot pressing and post-treatment may release formaldehyde. Have an impact. Xin Hongyi furniture http://xhy.cnjiaju.com/ share. The decorative effect of the decorative surface of the furniture on the sealing of formaldehyde is very obvious. In the specific implementation process, attention should be paid to the use of low formaldehyde release adhesives, various decorative materials and coatings, and reasonable processes to ensure that no new formaldehyde is released after decoration. Mirror Ball Disco,Hanging Mirror Ball,Lightweight Disco Ball,Christmas Decoration Ball Ruian Qingsen Arts & Crafts Co., Ltd , https://www.hxl-christmas.com
Bearing rate The so-called bearing ratio refers to the ratio of the surface area of ​​indoor furniture exposed to air to the volume of the room. The higher the load factor, the higher the formaldehyde concentration. Therefore, in the case that the function is basically satisfied, the number of pieces of furniture in the indoor space should be minimized, thereby reducing the emission of formaldehyde in the furniture.
The diffusion path is worth emphasizing the importance of edge sealing for panel furniture. When designing furniture, thin plates can be used as much as possible while meeting the strength and structure.
The use of the environment has a great influence on the formaldehyde emission of furniture. Temperature, humidity, and ventilation all affect formaldehyde emissions. Under normal climatic conditions, the temperature will increase by 8 ° C, the concentration of formaldehyde in the air will double; the humidity will increase by 12%, and the amount of formaldehyde will increase by about 15%. Therefore, under the premise of conditions, air conditioning and fresh air system devices can be used to adjust the indoor temperature and humidity and fresh air volume, so that formaldehyde emission is moderately controlled.
The formaldehyde emission concentration of Chen Fang time and condition furniture is proportional to the post-production release time. It should be placed for a period of time before use, and placed in a high temperature and high humidity environment during the discharge, to accelerate the emission of formaldehyde to reduce the pollution in the future use. 